User's Manual

Table Of Contents
D-4 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Appendix D: Teklogix Imagers Applet
Image Capture Predefined Presets
D.2.4 Image Capture Predefined Presets
The following presets enable successful image capture in almost all conditions.
Default
This preset works in a wide range of conditions. It is optimized for a normal office lighting
(about 300 Lux).
Motion
This preset uses a shorter exposure time so as to freeze motion.
Low light near
This preset is designed for dark conditions, it uses a longer exposure time and includes
the flash.
D.3 Using The Teklogix Imagers Applet
D.3.1 Configuring The Image Capture Presets
To configure the image capture presets, open the dialog box as follows:
Tap on Start>Settings>System tab.
Tap on the Teklogix Imagers icon, and if it’s not already selected, tap on the Imaging
tab.
Note: It is recommended that the default preset be used whenever possible.
Preliminary Draft