User's Manual

Table Of Contents
Chapter 2: Getting to Know the EP10
Inserting the Cards
26 EP10 Hand-Held (Windows Embedded 6.5) User Manual
2.10.1 Inserting the Cards
Switch off the EP10 – press and hold down the Power key, and when the Shutdown
screen is displayed, choose Shutdown and tap on OK.
Slide the battery latch to the right to unlock the battery, and remove it.
Pull the SD door down as the arrow icon on the door indicates.(TBD)
Orient the microSD or SIM card according to the legend stamped into the plastic. the
SD and SIM doors have guides or rails into which you can slide the card
For microSD, slide the card into the guides in the microSD door on the left-hand
slot.(TBD)
For SIM cards, slide the card in the right-hand slot.(TBD)
Slide the protective door back into place, and snap it shut.
2.11 The Camera
A built-in digital camera is available for the EP10. This option allows you snap still photo-
graphs or create short video clips. The Pictures & Videos applet is used to access and
configure the camera. For more details about the camera, refer to “Pictures & Videos” on
page 75.
2.12 General Maintenance
2.12.1 Caring for the Touchscreen
The top of the touchscreen is a thin, flexible polyester plastic sheet with a conductive
coating on the inside. The polyester can be permanently damaged by harsh chemicals and is
susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or
cut the plastic, or crack the internal conductive coating.
The chemicals listed below must not come into contact with the touchscreen:
sodium hydroxide,
concentrated caustic solutions,
benzyl alcohol, and
concentrated acids.
If the touchscreen is used in harsh environments, consider applying a disposable screen pro-
tector (model number CH6110TBD). These covers reduce the clarity of the display slightly
but will dramatically extend the useful life of the touchscreen. When they become scratched
and abraded, they are easily removed and replaced.
Preliminary Draft