User's Manual

Table Of Contents
Chapter 4: Programs
Using the Camera
76 EP10 Hand-Held (Windows Embedded 6.5) User Manual
Keep in mind that if there are no pictures stored on your EP10 as yet, you’ll only see the
Camera icon in this screen.
Tap on the Camera icon to activate the camera.
The screen will display the image your camera is pointed at. (The camera is built into the
back of the EP10.)
Frame the image in the EP10 screen. Press [ENTER/Power] to snap the photograph.
Photo Menu
When the camera is activated, tapping on Menu displays a set of commands to help you
modify how your camera operates, the quality of the photos it takes, and so on. You can also
use this menu to activate the video recorder rather than the still camera.
Photo File Icon
Indicates the camera
is active.
Tapping on this softkey
displays thumbnails of
photos stored on the EP10.
Preliminary Draft