User's Manual
Table Of Contents
- WORKABOUT PRO M/C Hand-Held Computer Quick Start Guide
- Table Of Contents
- 1. Basic Preparation
- 2. Getting To Know The WORKABOUT PRO
- 3. Navigating In Windows CE
- 4. General Maintenance
- 5. Support Services & Worldwide Offices
- Approvals
- Safety Summary
- Program License Agreements
- Microsoft's End User License Agreement
- Meetinghouse Data Communications, Inc. End User License Agreement
- End User License Agreement:
- Software License Terms:
- License Grant:
- Permitted Uses and Restrictions:
- High Risk Activities:
- Ownership:
- Termination:
- U.S. Government Restricted Rights:
- Export Law Assurances:
- Limited Warranty on Media: (if applicable)
- Disclaimer of Warranty on Software:
- Limitation of Liability:
- Government End Users:
- Controlling Law and Severability:
- Acknowledgement:
- MDC Acknowledgments:
- Complete Agreement:
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 15
If the touchscreen has never been calibrated or if the stylus pointer is
not accurate when you tap on an item:
• In the
Control Panel,
choose the
Stylus
icon, select the
Calibration
tab, and then tap on the
<Recalibrate>
button.
• Follow the onscreen directions to calibrate the display.
2.5 Indicators
WORKABOUT PROs use an LED (Light Emitting Diode),
onscreen messages and audio tones as indicators.
2.5.1 The LED
A single, two-coloured LED is located on the left side of the unit,
just above the <BKSP> key. When you press <ENTER/ON>, the
LED flashes green to indicate that the unit has been powered up. The
LED table below outlines the behaviour of the LED while the unit is
docked in a charger.
Keep in mind that the application running on the WORKABOUT
PRO can dictate how the LED operates. Review the documentation
provided with the application to determine LED behaviour.