User's Manual
Table Of Contents
- WORKABOUT PRO M/C Hand-Held Computer Quick Start Guide
- Table Of Contents
- 1. Basic Preparation
- 2. Getting To Know The WORKABOUT PRO
- 3. Navigating In Windows CE
- 4. General Maintenance
- 5. Support Services & Worldwide Offices
- Approvals
- Safety Summary
- Program License Agreements
- Microsoft's End User License Agreement
- Meetinghouse Data Communications, Inc. End User License Agreement
- End User License Agreement:
- Software License Terms:
- License Grant:
- Permitted Uses and Restrictions:
- High Risk Activities:
- Ownership:
- Termination:
- U.S. Government Restricted Rights:
- Export Law Assurances:
- Limited Warranty on Media: (if applicable)
- Disclaimer of Warranty on Software:
- Limitation of Liability:
- Government End Users:
- Controlling Law and Severability:
- Acknowledgement:
- MDC Acknowledgments:
- Complete Agreement:
Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide 3
1. Basic Preparation
Important:
All approval and safety information is outlined in the
‘WORKABOUT PRO Hand-Held Computer User
Manual’ – part number 8000024. This manual is
available on our web site www.psionteklogix.com
through the Teknet extranet. It is important that you
review all safety guidelines before charging a battery
or operating a scanner.
This quick start guide provides basic information on the operation
and features of the Psion Teklogix WORKABOUT PRO M (Mono-
chrome) and WORKABOUT PRO C (Colour) Hand-Held Compu-
ter. For more detailed information, refer to the
WORKABOUT PRO
M/C Hand-Held Computer User Manual (PN 8000024)
or the docu-
mentation supplied with the application you are using.
Typically, WORKABOUT PROs are configured at the factory and
arrive ready for use.
1.1 Charging The Battery
Batteries shipped from the factory are not charged. They must be
fully charged prior to use. Full capacity may not be reached until at
least 5 full charge/discharge cycles have been performed.
1.2 Installing The Battery
• Turn the fasteners at the base of the battery cover counter-
clockwise to unlock the cover and remove it. The top of the
stylus is shaped to help you loosen the fasteners.
• Insert the
charged
battery. Replace the battery cover, and turn
the fasteners at the base of the battery cover clockwise to lock
the battery in place.