User's Manual
Table Of Contents
- WORKABOUT PRO M/C Hand-Held Computer Quick Start Guide
- Table Of Contents
- 1. Basic Preparation
- 2. Getting To Know The WORKABOUT PRO
- 3. Navigating In Windows CE
- 4. General Maintenance
- 5. Support Services & Worldwide Offices
- Approvals
- Safety Summary
- Program License Agreements
- Microsoft's End User License Agreement
- Meetinghouse Data Communications, Inc. End User License Agreement
- End User License Agreement:
- Software License Terms:
- License Grant:
- Permitted Uses and Restrictions:
- High Risk Activities:
- Ownership:
- Termination:
- U.S. Government Restricted Rights:
- Export Law Assurances:
- Limited Warranty on Media: (if applicable)
- Disclaimer of Warranty on Software:
- Limitation of Liability:
- Government End Users:
- Controlling Law and Severability:
- Acknowledgement:
- MDC Acknowledgments:
- Complete Agreement:
4 Psion Teklogix WORKABOUT PRO Hand-Held Computer Quick Start Guide
Note:
If you are using a docking station, you can insert an
uncharged battery, dock the unit and switch it on.
1.3 Switching The Unit On
• Press and hold down the <ENTER/ON> key for at least
one second to switch the unit on.
• When the LED flashes green, release <ENTER/ON>.
A splash screen displaying the
Psion Teklogix
logo and the
Microsoft® Windows CE .NET
logo appears followed by the
startup desktop.
Note:
If the unit was already in use – the unit may be off (suspend
state) – pressing <ENTER/ON> ‘wakes’ the unit from this
state. The screen in which you were working prior to the sus-
pend state is displayed.
1.4 Switching The Unit Off (Suspend)
• Press the <BLUE> key, and then press <ENTER/ON> to
switch off the WORKABOUT PRO.