Instruction Manual Part 3

BlueTest Instruction Manual

bc01-an-047b

This material is subject to CSR’s non-disclosure agreement.

Page 51 of 56

BlueCore

Appendix 2

Known Software Issue(s) in BlueTest Version 1.4

(a) Pressing the Reset Chip button on the GUI while data is being transmitted sends a

hardware reset command to the chip and restarts the serial stack software.

Closing the GUI sends a hardware reset command to the chip.

If the link fails, the connection can only be recreated by manually resetting the chip

(power off/on) and by clicking on Reset Chip or closing down and restarting the GUI (both

of which will restart the serial stack software).

The above will not occur if no data is visibly scrolling in the window.

The tests concerned are:

g VCOTRIM

g BUILD LUT

g READ

g LUT

(b) There is a race between command responses indicating that a test has started and the

first data relating to that test. This does not affect the test results.

and restarting.