User's Manual

Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE Quick Reference Guide 11
1. Basic Preparation
Important: All approval and safety information is outlined in the
‘WORKABOUT PRO Hand-Held Computer With Windows
Mobile 2003 SE User Manual’ – part number 8000058.
This manual is available on our web site www.psiontek-
logix.com. It is important that you review all safety guide-
lines before charging a battery or operating a scanner.
This quick start guide provides basic information on the operation and fea-
tures of Psion Teklogix WORKABOUT PRO hand-held computers equipped
with the Windows Mobile 2003 SE operating system. For more detailed
information, refer to the WORKABOUT PRO Hand-Held Computer With
Windows Mobile 2003 SE User Manual (PN 8000058) or the documentation
supplied with the application you are using.
Typically, WORKABOUT PROs are configured at the factory and arrive
ready for use.
1.1 Charging The Battery
Batteries shipped from the factory are not charged. They must be fully
charged prior to use. Full capacity may not be reached until at least 5 full
charge/discharge cycles have been performed.
Important: The backup battery is trickle charged from the main bat-
tery. To maximize battery life, avoid excessive discharging
and recharging of the backup battery by keeping the main
battery fully charged.
IF YOU ARE POWERING UP A NEW UNIT, a warning
message may appear on the screen indicating that the
backup battery capacity is low. To recharge the backup
battery, you must fully charge the WORKABOUT PRO
with
the main battery installed in the unit. An overnight
charge is recommended.
1.2 Installing The Battery
• Turn the fasteners at the base of the battery cover counter-clockwise
to unlock the cover and remove it.