User's Manual

Approvals And Safety Summary
XII
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
This product complies with CDRH 21 CFR 1040 Class II and IEC 60825-
1:1993+A1:1997+A2:2001 laser product.
LASER WARNINGS
For your own safety, it is critical that you comply with the following warn-
ings:
CAUTION
The laser aperture is located in the front of termnial. Do not look into the
laser beam or point the beam at people or animals.
CAUTION
Using controls or adjustments, or performing procedures other than those
specified herein may result in hazardous radiation exposure.
CAUTION
The use of optical instruments with this product will increase eye hazard.
This product contains a laser scanner that emits less than 1.2 mW maximum
radiant power at a wavelength of 650nm to 680nm. This product complies
with CDRH 21 CFR 1040 Class II and IEC 60825-
1:1993+A1:1997+A2:2001 Class 2 laser product.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Operating Psion Teklogix equipment where explosive gas is present may
result in an explosion.
DO NOT REMOVE COVERS OR OPEN ENCLOSURES
To avoid injury, the equipment covers and enclosures should only be
removed by qualified service personnel. Do not operate the equipment
without the covers and enclosures properly installed.
Before removing the cover and enclosures, remove the battery pack at first