User Manual

Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide 11

1. Basic Preparation

Important:

All approval and safety information is outlined in the

‘WORKABOUT PRO Hand-Held Computer User Manual’

– part number 8000024. This manual is available on our

web site www.psionteklogix.com. Open the ‘Products’ menu

followed by ‘Hand-Helds’. It is important that you review all

safety guidelines before charging a battery or operating a

scanner.

This quick start guide provides basic information on the operation

and features of the Psion Teklogix WORKABOUT PRO S Hand-

Held Computer. For more detailed information, refer to the

WORK-

ABOUT PRO Hand-Held Computer User Manual (PN 8000024)

the documentation supplied with the application you are using.

Typically, WORKABOUT PRO S hand-helds are conﬁgured at the

factory and arrive ready for use.

1.1 Charging The Battery

Batteries shipped from the factory are not charged. They must be

fully charged prior to use. Full capacity may not be reached until at

least 5 full charge/discharge cycles have been performed.

1.2 Installing The Battery

• Turn the fasteners at the base of the battery cover counter-

clockwise to unlock the cover and remove it. The top of the

stylus is shaped to help you loosen the fasteners.

• Insert the

charged

battery. Replace the battery cover, and turn

the fasteners at the base of the battery cover clockwise to lock

the battery in place.