User Manual

Psion Teklogix WORKABOUT PRO S Hand-Held Computer Quick Start Guide 23
2.5 Indicators
The WORKABOUT PRO S uses an LED (Light Emitting Diode),
onscreen messages and audio tones as indicators.
2.5.1 The LED
A single, two-coloured LED is located on the left side of the unit,
just above the <1> key. When you press <ENTER/ON>, the LED
flashes green to indicate that the unit has been powered up. The LED
table below outlines the behaviour of the LED while the unit is
docked in a charger.
Keep in mind that the application running on the WORKABOUT
PRO S can dictate how the LED operates. Review the documenta-
tion provided with the application to determine LED behaviour.
LED Behaviour Indication
Solid Green Charge complete.
Blinking Green Charge in progress.
Solid red Temperature outside charge range.
Blinking red Battery is not charging. Battery fault.