User's Manual Part 2

Appendix B: Wireless Wide Area Network (WWAN)

Tools Menu

B-6 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual

WWAN Data Configuration

Enable Automatic Connect

If the Enable automatic connect checkbox is checked (unchecked by default), the Wire-

less WAN user interface will attempt to establish a GPRS connection whenever GPRS is

available (e.g. after resume from suspend without further user interaction).

To activate the automatic connection mode:

• Tap on the OK button.

While automatic connection mode is enabled, the Connect Data button in the main Wire-

less LAN

dialog box changes to Disable Auto. To close the currently active connection (if

any) and disable the automatic connection mode:

• Tap on Disable Auto.