User's Manual Part 1

Chapter 5: Configuration
The Devices Tab
112 WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual
5.7.1 The Devices Tab
If you intend to configure Bluetooth communication with specific devices (a
scanner or printer for example), power on and bring the devices within 5 m (16.4 ft.)
of the hand-held before proceeding with the discovery process described below.
Scan
•Click on the Scan button to list available devices.
Figure 5.9 Available Bluetooth Devices
Wait for the WORKABOUT PRO G2 to complete its scan (approximately 20
seconds). When scanning starts, the Scan button will change to Stop
—if necessary,
you can tap on this button to stop the process. Once scanning is complete, all
discovered devices will be displayed in the list box, with Name, Address, Active
status, and PIN information.