User's Manual Part 1

WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 131
Chapter 5: Configuration
Creating Partitions
1. Press the New button next to the Partitions list box. The New Partition
dialog appears:
2. Enter a name for the partition.
3. If more than one partition is desired, uncheck the Use All Available
Disk Space checkbox, then specify the desired number of sectors to be
used by the partition:
Note: The sector size of the card is given on the left-hand side of the Storage
Properties dialog.
4. Press OK. The new partition appears in the Partitions list:
The new partition is automatically mounted. This is indicated by an asterisk (*) next
to its name in the partition list. Any unallocated space on the card is indicated at the
left, and additional partitions can be created in it.