User's Manual Part 2

WORKABOUT PRO G2 Hand-Held With Windows Embedded CE 5.0 User Manual 207
Chapter 5: Configuration
Communities Tab
Location
This parameter is used to identify the physical location of this node (e.g., Warehouse
A: Pillar 32B). The content of this parameter is accessible through MIB-II’s
sysLocation object.
5.12.2 Communities Tab
The Communities tab allows you to limit access to SNMP-managed devices to those
SNMP Managers with matching “community names”, as specified by RFC 1157.
Enable SNMP
Enabling Enable SNMP allows the device to respond to SNMP queries and to send
Traps. After enabling this option and rebooting the device, the SNMP Agent will
automatically start up. To disable this feature, remove the check mark from the
check box.
5.12.2.1 Adding A Community
• Choose the Add button to add a new ‘community’.