User's Manual Part 1

WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 49
Chapter 3: Getting To Know Your WORKABOUT PRO
Pairing A Bluetooth Headset Or Other Bluetooth Device
3.9.1 Pairing A Bluetooth Headset Or Other Bluetooth Device
Note: If the Bluetooth radio is not already enabled, tap on the Power icon in the
Control Panel, tap on the Devices tab and enable the Bluetooth radio.
To pair a headset:
• Follow the headset manufacturer’s instructions to place the headset you
want to place in pairing mode.
•In the Control Panel, tap on the Bluetooth icon choose the Devices tab and
Scan for devices in your area. (Note that if you’re pairing the device for the
first time, the device scan occurs automatically; you do not need to tap on
the Scan button to perform a scan.)
When the scan is complete, a list of devices is listed.
• Double-click on headset you want to pair with. If you prefer, you can high-
light headset and tap on the Services button.
A dialog box appears requesting that you enter a PIN number.
• Type your pin number and tap on OK.
A Services dialog box appears listing headset.
• Press and hold the stylus on headset. In the pop-up menu, choose Active.
Your headset is now paired. A COM/BSP port name will now appear beside the
service for this device. An asterisk will appear under the Active list in the Service
screen.
3.10 Inserting The SD/MMC Card And SIM Card
There are two slots available in the battery compartment – the lower slot is provided
for a SD/MMC (Secure Digital/Multi-Media Card) and the upper slot is for a SIM
(Subscriber Identity Module) card.
SD/MMC cards provide additional non-volatile memory to your hand-held. SIM
cards allow access to the hand-held Vo ic e option, access the Internet, and so on.
3.10.1 Inserting The Card
• Switch off the WORKABOUT PRO.
• Remove the battery cover and the battery.
A hinged door at the top of the battery compartment protects the connectors. It is
hinged on the left side.
• Pull the hinged SD door down as the arrow icon on the door indicates.