User's Manual Part 2

WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 125
Chapter 5: Configuration
Creating A Backup Profile
• Next, choose the Profile Type you want to create:
• For this device only – creates a backup that is manually restored by the
operator.
• AutoRestore for this device only – creates a profile that automatically
restores itself following a cold start.
• AutoRestore for this and other devices – creates a profile that automati-
cally restores after resuming from a cold start, but it will not contain the
touchscreen calibration coordinates or the Wireless radio settings.
• Finally, choose a Profile Location – The location for the profile is either
\Flash Disk or \SD-MMC Card.
• Tap on the Next
button to display the next dialog box Add Files.
Add Files
Figure 5.13 Adding Files
By default, All Files is selected so that all installed or copied files, database entries,
and the Registry will be saved. You can, however, limit the backup to databases,
and/or the registry only. By tapping the checkbox next to these items, you can add or
remove a check mark to enable or disable the option.
The Select Files option allows you to select predefined file types.
• Remove the check mark next to All Files. You’ll notice the checkbox next
to Select Files changes , indicating that additional options are available.