User's Manual Part 2

WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual 85
Chapter 5: Configuration
Display Properties
5.5.1.1 Display Backlight
The backlight is activated for a configurable amount of time when the
WORKABOUT PRO is in use (key press, scanner trigger or data received from the
host). The Display Properties dialog box in the Control Panel allows you to specify
the intensity of the backlight along with how long the display will maintain the
specified intensity.
Note: Keep in mind that this option may be restricted to supervisory use only.
•In the Display Properties dialog box, open the Backlight tab.
Notes: Backlight changes take effect immediately. You do not need to reset the
unit.
To maximize battery run time, keep the display backlight brightness and
active durations as low as possible.
Intensity
This parameter is used to adjust the light intensity of the WORKABOUT PRO
backlight. Sliding the bar to the left lowers the light intensity, and sliding it to the
right raises the intensity.