User's Manual
Table Of Contents
- 7530 G2 Hand-Held Computer Quick Reference Guide
- Table Of Contents
- 1. Basic Preparation
- 2. Getting To Know Your 7530 G2
- 3. Navigating In Windows CE
- 4. Scanner Specifications
- 5. General Maintenance
- 6. Support Services & Worldwide Offices
24 Psion Teklogix 7530 G2 Hand-Held Computer Quick Reference Guide
2.2 The Battery
The 7530 G2 hand-held operates with a Lithium-Ion battery pack.
Preparing the hand-held unit for operation requires that a battery
pack be charged and installed in the unit.
Important: Before charging or using the battery pack, it is criti-
cal that the safety information on page 8 be reviewed
and that all warnings are strictly followed.
2.2.1 Battery Swap And Runtime
Important: Always switch the unit off before changing the bat-
tery. While the battery is being replaced, the 7530 G2
will save its current data for at least 20 minutes.
The 7530 G2 battery will operate for ten hours under typical operat-
ing conditions after a full charge. Typical battery life is 300 cycles or
2 years average use. A full charge is completed in 4 hours with a typ-
ical charge time of 1.5 hours.
Battery Pack
Scanner Window
Docking Port
Tether Port