User's Manual

5.7 Scanner Properties Setup
The Teklogix Scanners icon in the Control Panel provides dialogue boxes in which you can
tailor bar code options and choose the bar codes your scanner will recognize.
5.7.1 Scanner Options
Figure 5.45 Bar Code Options
To display the sub-menus available in the Options tab:
• Highlight the option you want to work with, and press the right
<ARROW> key.
To change a parameter:
• Highlight the parameter and press the <RIGHT> arrow key, or press the
<SPACE> key.
If a field requires text entry, a text field is displayed in which you can type
the appropriate value.
Display Parameters
Scan Result
When this parameter is enabled (set to ‘ON’), the type of bar code and the result of
the scan appear on the screen. Note that this information is only displayed after a
successful decode and is visible only while the scanner trigger is pressed. When the
trigger is released, this information is cleared from the screen.