User's Manual

Psion Teklogix 7530 Hand-Held Computer User Manual197

Chapter 6: Tekterm Application

Host Conn

Host

This parameter is used to assign a host IP address using the format ###.###.###.###

or a host name if DNS is used.

Port

“Port” speciﬁes the 9010t (TCP Direct) or Telnet port number. The default

9010t port number assigned is 9999, the maximum allowable value. The default

Telnet port number assigned is 23 with a maximum allowable value of 32767.

ENTER Pmpt

This string indicates that the terminal is waiting for the user to press <ENTER> at

the time of connection.

ESC Prompt

This string indicates that the user can press the <ESC> key to terminate a

connection attempt before the connection is established.

Auto Login

The “Auto Login” parameters are used to deﬁne whether or not the terminal will

attempt to log in automatically.

The Auto Login sequence is as follows:

1. Host sends “Login Prompt”.

2. Terminal responds with “Login”.

3. Host sends “Password Prompt”.

4. Terminal responds with “Password”.

5. Host may send password echo.

6. Terminal ignores password echo if “Password Echo” is set to “Y”,

otherwise skip to step 7.

7. Terminal looks for “Login Failed” in next transmission from host.

8. Login successful or Login failed and return to step 1.

Password Prompt word: see text

Password see text

Password Echo Y Y/N

Range

Auto Login