User's Manual

Psion Teklogix 7530 Hand-Held Computer User Manual207
Chapter 6: Tekterm Application
Kbd Modes
The maximum number of characters waiting for echo is 25.
Any additional characters are sent to the host but not displayed.
When the 7530 is in insert mode, smart echo is disabled.
Table 6.5 Function Of Special Keys In Local Echo Mode
BKSP Key
This parameter determines whether the <BKSP> key acts as a delete key, erasing
the character to the right of the cursor, or a backspace key, erasing the character
to the left of the cursor.
PrintScreen Key
This parameter determines the “hot-key” for printing the screen contents via the
7535 serial port. The default is <CTRL> P (16).
Note: The 7530’s port must be set to “printer” (see“Ports– Tether And Con-
sole” on page 235).
Key Function
ENTER
In newline mode, this key moves the cursor to the first
column of the next line. In line feed mode, this key
moves the cursor to column one of the current line.
CTRL-G (Bell) The 7530 beeps.
CTRL-H (Backspace) The cursor moves back one space.
CTRL-I (Tab) The cursor moves to the next horizontal tab stop.
CTRL-J (Line Feed)
CTRL-L (Form Feed)
The cursor moves down one line in the same column.
CTRL-K (Vertical
Tab)
The cursor moves down to the next line with a vertical
tab set.
DEL
This key deletes the character to the left of the cursor
and moves the cursor to the left by one position.