User's Manual

Approvals And Safety Summary
xviPsion Teklogix 7530 Hand-Held Computer User Manual
LASER W ARNINGS
For your own safety, it is critical that you comply with the following warnings:
CAUTION
Do not look into the laser beam or point the beam at people or animals.
CAUTION
Using controls or adjustments, or performing procedures other than those
specified herein may result in hazardous radiation exposure.
CAUTION
The use of optical instruments with this product will increase eye hazard.
This product contains a laser scanner that emits less than 1.2 mW maximum radiant
power at a wavelength of 650nm or 680nm. This product complies with 21 CFR
1040.10, 1040.11 and DIN EN 60825-1: 2001, and is classified as a Class 2 laser
product.
The SE1200 ALR has an maximum radiated power less than 1.4 mW; according to
EN 60825-1: 2001 it is classified as a Class 3B laser product.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Operating Psion Teklogix equipment where explosive gas is present may
result in an explosion.
DO NOT REMOVE COVERS OR OPEN ENCLOSURES
To avoid injury, the equipment covers and enclosures should only be
removed by qualified service personnel. Do not operate the equipment
without the covers and enclosures properly installed.
WARNING: This portable RF transmitting device has been tested and found to 
comply with FCC and IC RF exposure requirements with the maximum SAR of 0.1 
Watts/Kg with body tissue. The antenna used for this transmitter must not be 
co-located in conjunction with any other antenna or transmitter.