User's Manual

Chapter 2: Basic Checkout

Conﬁguring An IEEE 802.11 Radio Installed In The 7530

20Psion Teklogix 7530 Hand-Held Computer User Manual

4. W ireless Information Tab

The options under this tab display existing networks to which you can

connect, and it allows you to add a new network or modify the settings

for an existing network.

Note:

Conf

igure button – To change the settings in an existing network, highlight

the network you want to modify, and choose the Conﬁgure button to display

the W ireless Properties dialogue box.

Connect button – To force connection to a speciﬁc, existing network, highlight

the network to which you want your 7530 to connect, and choose the Connect

button.

Figure 2.8 W ireless Information Tab

This tab lists available networks – any access points that are broadcasting

an SSID, and it lists preferred networks – networks that you have conﬁg-

ured. Since access points are generally secure, they will most likely not

be listed here. By default, 7535 attempts to connect to preferred networks.

This behaviour can be changed by enabling (√)

‘Automatically connect to non-pre-

ferred networks’ in the Advanced dialogue box (page 26).

•To add a new conﬁguration, press the <TAB> key to highlight the

dd New button, and press <ENTER>. A blank W ireless Properties dialogue

box is displayed.