User's Manual

Psion Teklogix 7530 Hand-Held Computer User Manual27
Chapter 2: Basic Checkout
Deleting A Preferred Network
2.2.5.2 Deleting A Preferred Network
To delete a network from this list:
• Press the <TAB> key to highlight the networks list.
• Use the <UP> or <DOWN> arrow keys to highlight the network that you
want to remove.
• Highlight the
D
elete button, and press <ENTER>.
2.2.5.3 Changing Network Properties
To change the properties of an existing preferred network:
• Highlight the network that you want to modify.
• Press <TAB> to highlight the
P
roperties button, and press <ENTER>.
• Make any necessary changes in the W ireless Properties dialogue box, and press
<ENTER> to save the changes.
2.3 Checking The Scanner
If your 7535 is equipped with an internal scanner, it will successfully decode most
1D bar codes as delivered. Press the SCAN button and check for a valid decode on
any UPC bar code. If desired, set the “Dot Time” parameter to zero in the ‘Teklogix
Scanners’ applet in the Control Panel to turn off the default aiming dot.
Performance is improved if you disable all unneeded bar codes under the ‘Bar
Codes’ dialogue screen. Review “Scanner Properties Setup” on page 118 for details
about bar codes.
2.4 Using Microsoft
®
ActiveSync
®
To Work W ith Files
ActiveSync® – Microsoft PC connectivity software – can be used to connect the
7535 to PCs running this software. By connecting the 7535 to a PC with a cable and
running ActiveSync on the PC, you can:
• View 7535 files from Windows Explorer.
• Drag and drop files between the 7530 and the PC in the same way that you
would between PC drives.
• Back up 7530 files to the PC, then restore them from the PC to the
hand-held again, if needed, and so on.
Note: You’ll need the USB setup utility to configure the .ini file. For information
about this USB application, refer to Appendix C: USB Setup Application.