User's Manual
Table Of Contents
- Cover
- Program License Agreements
- TABLE OF CONTENTS
- Approvals And Safety Summary
- Introduction 1
- Basic Checkout 2
- Getting To Know Your 7535 3
- 3.1 Features Of The 7535
- 3.2 The Battery
- 3.3 Switching The 7535 Hand-Held On And Off
- 3.4 The Keyboard
- 3.5 The Display
- 3.6 7535 Indicators
- 3.7 Internal Scanners
- 3.8 Connecting & Disconnecting Tethered Peripherals
- 3.9 Monitoring The Battery And Maximizing Run Time
- 3.10 Monitoring The Network Connection
- 3.11 Uploading Data In A Docking Station
- 3.12 General Maintenance
- Working With Windows CE 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 Pocket PC Compatibility
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.7 Scanner Properties Setup
- 5.7.1 Scanner Options
- 5.7.2 Bar Codes
- 5.7.2.1 Code 39 Settings
- 5.7.2.2 Code 128 Settings
- 5.7.2.3 EAN 13 Settings
- 5.7.2.4 EAN 8
- 5.7.2.5 UPC And EAN Settings
- 5.7.2.6 UPC A Settings
- 5.7.2.7 UPC E Settings
- 5.7.2.8 Codabar
- 5.7.2.9 Code 93
- 5.7.2.10 Code 11
- 5.7.2.11 Interleaved 2 of 5
- 5.7.2.12 MSI Plessey
- 5.7.2.13 Discrete 2 of 5
- 5.7.2.14 IATA 2 of 5
- 5.7.2.15 Postal: Australian
- 5.7.2.16 Postal: Japanese
- 5.7.2.17 Postal: Korean
- 5.7.2.18 Postal: PlaNET
- 5.7.2.19 Postal: PostNET
- 5.7.2.20 Postal: Royal Mail
- 5.7.2.21 2D DataMatrix
- 5.7.2.22 2D Maxicode
- 5.7.2.23 2D PDF-417
- 5.7.2.24 2D Micro PDF-417
- 5.7.2.25 2D QR Code
- 5.7.2.26 2D RSS Code
- 5.7.2.27 Aztec
- 5.7.3 Translations
- 5.8 SNMP (Simple Network Management Protocol) Setup
- Tekterm Application 6
- 6.1 The Tekterm Application
- 6.2 Additional Keyboard Functions
- 6.3 Keyboard Modes
- 6.4 The Tekterm Status Area
- 6.5 TESS Emulation
- 6.6 ANSI Emulation
- 6.7 The Radio Statistics Screen
- 6.8 The Tekterm Startup Display Menu
- 6.9 Working With Menus
- 6.10 Resetting The 7535 Hand-Held Computer
- 6.11 The Parameters Menu
- 6.12 Display Options
- 6.13 More Parameters
- 6.14 Radio Parameters
- 6.15 System Parameters
- 6.16 Scanner Control Panel
- 6.17 View Manager
- 6.18 Applications
- 6.19 Ports- Tether And Console
- 6.20 Network
- Peripheral Devices & Accessories 7
- 7.1 External Bar Code Readers
- 7.2 The 7535 Battery
- 7.3 Important Charger Safety Instructions
- 7.4 Chargers
- 7.5 Gang Charger
- 7.6 Combo Charger
- 7.7 Combo Dock
- 7.8 Quad Dock
- 7.9 Portable Docking Module (PDM)
- 7.11 The 7535 Picker Cradle
- Specifications 8
- Support Services And Worldwide Offices
- Port Pinouts
- USB Setup Application
Chapter 7: Peripheral Devices & Accessories
Troubleshooting
262Psion Teklogix 7530 Hand-Held Computer User Manual
7.7.4 Troubleshooting
Troubleshooting issues for the combo dock are identical to those of the quad dock.
Refer to “Troubleshooting” on page 264 for helpful tips.
7.8 Quad Dock
Note: The quad dock is shipped with a user manual. It is critical that this man-
ual be reviewed for additional information and updates.
The Quad Dock permits each of four docked 7530 hand-helds to communicate with
a 10/100 BaseT Ethernet network at greater than 2Mbps. It also provides sufficient
power to operate and fast charge the batteries in the 7530s.
7.8.1 Installation
The quad dock should be located away from excessive dirt, dust and contaminants.
The ambient temperature must fall between 0˚ C to 39 ˚C (32˚ F to 102˚ F). The
7535 internal charger will not charge batteries outside of this temperature range. For
maximum performance, it is recommended that the quad dock be operated at room
temperature – from 18˚ C to 25˚ C (64˚ F to 77˚ F).
The quad dock can consume up to 3A @ 120VAC or 1.5A @ 240VAC. Ensure that
the mains circuit supplying the unit is adequate, especially if several docks are being
powered from the same circuit.
After unpacking the unit:
• Visually inspect the unit for any damage.
• Install the IEC power cord and apply power.
A green indicator in the lower-right corner of the front panel lights up to indicate
that power is present.
• Attach a CAT5 RJ45 network patch cable (supplied) between your network
and the RJ45 jack on the rear of the dock.
A green LED is illuminated next to the RJ45 connector when a valid network link is
established.
A user application must be loaded onto each 7530 that utilizes the quad dock for
communication. When the network is connected and this application is loaded, the
quad dock is ready for use.