User's Manual
Table Of Contents
- Cover
- Program License Agreements
- TABLE OF CONTENTS
- Approvals And Safety Summary
- Introduction 1
- Basic Checkout 2
- Getting To Know Your 7535 3
- 3.1 Features Of The 7535
- 3.2 The Battery
- 3.3 Switching The 7535 Hand-Held On And Off
- 3.4 The Keyboard
- 3.5 The Display
- 3.6 7535 Indicators
- 3.7 Internal Scanners
- 3.8 Connecting & Disconnecting Tethered Peripherals
- 3.9 Monitoring The Battery And Maximizing Run Time
- 3.10 Monitoring The Network Connection
- 3.11 Uploading Data In A Docking Station
- 3.12 General Maintenance
- Working With Windows CE 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 Pocket PC Compatibility
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.7 Scanner Properties Setup
- 5.7.1 Scanner Options
- 5.7.2 Bar Codes
- 5.7.2.1 Code 39 Settings
- 5.7.2.2 Code 128 Settings
- 5.7.2.3 EAN 13 Settings
- 5.7.2.4 EAN 8
- 5.7.2.5 UPC And EAN Settings
- 5.7.2.6 UPC A Settings
- 5.7.2.7 UPC E Settings
- 5.7.2.8 Codabar
- 5.7.2.9 Code 93
- 5.7.2.10 Code 11
- 5.7.2.11 Interleaved 2 of 5
- 5.7.2.12 MSI Plessey
- 5.7.2.13 Discrete 2 of 5
- 5.7.2.14 IATA 2 of 5
- 5.7.2.15 Postal: Australian
- 5.7.2.16 Postal: Japanese
- 5.7.2.17 Postal: Korean
- 5.7.2.18 Postal: PlaNET
- 5.7.2.19 Postal: PostNET
- 5.7.2.20 Postal: Royal Mail
- 5.7.2.21 2D DataMatrix
- 5.7.2.22 2D Maxicode
- 5.7.2.23 2D PDF-417
- 5.7.2.24 2D Micro PDF-417
- 5.7.2.25 2D QR Code
- 5.7.2.26 2D RSS Code
- 5.7.2.27 Aztec
- 5.7.3 Translations
- 5.8 SNMP (Simple Network Management Protocol) Setup
- Tekterm Application 6
- 6.1 The Tekterm Application
- 6.2 Additional Keyboard Functions
- 6.3 Keyboard Modes
- 6.4 The Tekterm Status Area
- 6.5 TESS Emulation
- 6.6 ANSI Emulation
- 6.7 The Radio Statistics Screen
- 6.8 The Tekterm Startup Display Menu
- 6.9 Working With Menus
- 6.10 Resetting The 7535 Hand-Held Computer
- 6.11 The Parameters Menu
- 6.12 Display Options
- 6.13 More Parameters
- 6.14 Radio Parameters
- 6.15 System Parameters
- 6.16 Scanner Control Panel
- 6.17 View Manager
- 6.18 Applications
- 6.19 Ports- Tether And Console
- 6.20 Network
- Peripheral Devices & Accessories 7
- 7.1 External Bar Code Readers
- 7.2 The 7535 Battery
- 7.3 Important Charger Safety Instructions
- 7.4 Chargers
- 7.5 Gang Charger
- 7.6 Combo Charger
- 7.7 Combo Dock
- 7.8 Quad Dock
- 7.9 Portable Docking Module (PDM)
- 7.11 The 7535 Picker Cradle
- Specifications 8
- Support Services And Worldwide Offices
- Port Pinouts
- USB Setup Application
Psion Teklogix 7530 Hand-Held Computer User Manual269
Chapter 7: Peripheral Devices & Accessories
Picker Cradle Mounting Recommendations
7.11.1 Picker Cradle Mounting Recommendations
Warning: Before mounting a picker cradle in a vehicle, there are a number
of operator safety issues that require careful attention. An improp-
erly mounted cradle may result in one or more of the following:
operator injury, operator visibility obstruction, operator distraction
and/or poor ease of egress for the operator. Psion Teklogix strongly
recommends that you seek professional mounting advice from the
vehicle manufacturer.
Cable routing within a vehicle cab also requires careful consider-
ation, especially for separately tethered scanners and other devices
with loose cables. If you are unable to obtain suitable advice,
contact Psion Teklogix for assistance (see Appendix A: Support
Services And Worldwide Offices). Note also that for better protec-
tion, the equipment should be mounted inside the vehicle roll cage.
Pedestal mounts are recommended for all fixed mount locations because they offer
optimal operator access. In addition, for safety reasons, only pedestal mounts with
fully locking joints should be used in vehicles. Always adjust the pedestal for the
optimum viewing angle, and securely tighten the hex and wing screws.
The most effective way to mount the picker cradle is to use the four #8-32 threaded
inserts on the rear of the unit. Bolts must not extend more than 10mm (3/8") into the
cradle.
To accommodate the service loop of the connector cable, leave a 4" clearance at the
bottom of the cradle. Leave a 7" (minimum) clearance at the top of the cradle to
allow easy removal of the hand-held. Also remember to leave at least a 3" clearance
at the sides of the cradle to allow activation of the release knobs. Refer to the
detailed assembly instructions that are packaged with the cradle when selecting a
mounting location.
7.11.1.1 Mounting Template
The picker cradle is shipped with detailed mounting instructions including a drill
template.