User's Manual

Psion Teklogix 7535 G2 Hand-Held Computer Service Manual 3
Chapter 1: Introduction
About This Manual
1.1 About This Manual
This manual is intended as a technical reference guide for the Psion Teklogix 7535 G2 Hand-Held
Computer, to be used by field personnel servicing those units at both the assembly and component level.
Approvals And Safety Summary
is an overview of the 7535 G2 Hand-Held Computer.
Chapter 1: Introduction
describes the features of the 7535 G2 Hand-Held Computer.
Chapter 2: Controls
describes the controls of the 7535 G2 Hand-Held Computer.
Appendix A: Support Services And Worldwide Offices
provides the helpdesk phone number at the Mississauga, Ontario, Canada office and details the support
services available. This appendix also lists the worldwide office addresses and phone numbers.
1.2 Supporting Collateral
For 7535 G2 schematics, mechanical fabrication drawings, PCB fabrication drawings, datasheets, etc.
please refer to the Psion Teklogix intranet website:
https://home.teklogix.com/do/mississauga_products/
Bills of Materials are available from BaaN. The session to print BOMs is tibom1410m000 (print to
“Word” if a soft copy is required).
1.3 About The 7535 G2 Hand-Held Computer
The 7535 G2 is an industrial hand-held computer that runs the Microsoft® Windows® CE.net operating
system. The 7535 G2 is intended for operation in temperatures from 0°C to +50°C. It supports the
following features:
• A portrait-mode passive monochrome or TFT colour ¼ VGA display (with or without a
touchscreen) with white LED backlighting.
• 58- or 36-key keyboard with EL backlighting.
• 32 MB (or 64 MB) of on board flash.
• 64 MB (or 128 MB) of on board SDRAM.
• Various internal and external undecoded and decoded scanners.
• Two different internal image scanners.
• 802.11b Compact Flash (CF) radio.
• An internal SD card slot intended for use with a memory card or a Bluetooth radio.