User's Manual

26 Psion Teklogix 7535 G2 Hand-Held Computer Quick Start Guide
Note: If the 7535 G2 is in suspend state, pressing [ENTER]
‘wakes’ the unit from this state. The screen in which
you were working before the computer entered suspend
state is displayed.
1.6 Switching The 7535 G2 Off
Important: Keep in mind that turning off the 7535 G2 does not
result in a complete reboot; rather, the unit enters a
power-saving, “suspend” state. When the hand-held
is turned on from suspend state, operation resumes
within a few seconds.
To switch off the 7535 G2:
• Press the [BLUE] key, and then press the [ENTER] key.
Important: If the word ‘BLUE’ is displayed in uppercase
in the
taskbar area at the bottom of the screen, this key is
locked “on”—the 7535 G2 will not switch off. Press
the [BLUE] key again to unlock it; then press
[BLUE] [ENTER] to switch the 7535 G2 off.
If the ‘BLUE’ option is enabled in the ‘One Shots’
dialog box (accessible through the ‘Keyboard’
Control Panel icon) the 7535 G2 can be turned off
when the [BLUE] key is locked on.
1.7 Connecting To An 802.11 Network
In most cases, the 7535 G2 must be configured before it can connect
to an 802.11 wireless network. Chapter 2, Section 2.2.2, “Configur-
ing An IEEE 802.11 Radio Installed In The 7535 G2” in the
7535 G2 Hand-Held Computer User Manual (PN 8000075)
describes this configuration process. Once the 7535 G2 is properly