User's Manual

Chapter 5: Configuration
Suspend Threshold
102
Psion Teklogix 7535 Hand-Held Computer User Manual
5.5.4.3 Suspend Threshold
• In the Power Properties dialogue box, open the Suspend Threshold tab.
Figure 5.19 Suspend Threshold Properties
Suspend Threshold
The sliding bar in this tab is used to set the battery capacity (as a percentage value)
at which the hand-held will be forced into a suspend state. For example, if you slide
the bar in the
Suspend Threshold tab to the right to the 10% level, when the battery
capacity falls to 10%, the 7535 will enter suspend state. You will not be able to
resume until the battery is charged, or you operate the 7535 using AC power. The
allowable threshold ranges from 0 to 50%. The default value is 0%.
Note: The7535 hand-held does not enter suspend state when it is using
AC power.
Main Battery Status
This field indicates the status of the main battery.
Estimated Operating Time
This field estimates the length of time the 7535 can remain ‘on’ (operating) before
reaching the configured
Suspend Threshold.
Estimated Battery Backup Time
This field displays the amount of time the state of the 7535 will be maintained in
suspend at the currently configured
Suspend Threshold.