User's Manual Part 2

Chapter 6: Tekterm Application
Emulation
228
Psion Teklogix 7535 Hand-Held Computer User Manual
Features – 2392/Telnet
Clear Entry Fields
When this parameter is set to ‘Y’, an empty entry field is created in place of an entry
field filled with spaces.
Note: This operation is only performed on screens received from the host. Data
sent to the host remains unaffected.
Passthru Printing
Setting this parameter to ‘Y’ allows the host to send data directly to the 7535 serial
port. This option is most commonly used for printing.
AIAG Character
This parameter is used to enter a decimal representation of the ASCII character code
of the AIAG character. A value of 0 (zero) disables this feature.
When a bar code data is scanned, the 7535 searches for AIAG fields on the current
page that can accept the bar code data. The application program distinguishes an
entry field as AIAG by preceding the field with this special mode character which
indicates the existence of AIAG fields.
Barcode Character
Barcode-input-only fields are special entry fields that only accept input from a bar
code reader. The application program identifies a barcode-input-only entry field by
preceding the field with a special character.
Clear Entry Fields N Y/N
Passthru Printing N Y/N
AIAG Character 0 0-255
Barcode Character 0 0-255
Serial IO Character 0 0-255
Fixed Field Ovrhd 5 0-80
Enable Alarm N Y/N
Command Region Up 0 0-24
Command Region Down 0 0-24
Command Region Left 0 0-80
Command Region Right 0 0-80
Features
Range
06