User's Manual Part 2

Chapter 6: Tekterm Application
Emulation
230
Psion Teklogix 7535 Hand-Held Computer User Manual
3274/Telnet Emulation
Fujitsu Host
If this parameter is set to ‘Y’, data is sent in Fujitsu format. Enabling ‘Fujitsu Host’
causes the standard IBM formatting codes (for start of field, setting buffers, etc.) to
be replaced by the codes used by Fujitsu host computers.
Intl EBCDIC
If this parameter is enabled (set to ‘Y’), the ‘international’ EBCDIC character set is
used, swapping the positions of the ! and ] characters.
Nulls in Fields
Setting this parameter to ‘Y’ allows ‘null’ characters – e.g., hyphens (-) or periods
(.) – to fill in empty entry fields.
IP for SysReq
When the system request key is pressed, a Telnet “Interrupt Process” command is
generated. The “Interrupt Process” command is sent to the host in place of the
standard mechanism used to send the system request key press to a host using
Telnet.
Fujitsu Host N Y/N
Intl EBCDIC N Y/N
Nulls in Fields N Y/N
IP for SysReq N Y/N
BRK for Attn N Y/N
LU Name Enabled N Y/N
LU Name see text
Features » see text
FKEY0-7 » see text
FKEY8-15 » see text
FKEY16-23 » see text
FKEY24-31 » see text
FKEY32-39 » see text
Emulation
Range
05