User's Manual Part 2

Chapter 6: Tekterm Application
Emulation
232
Psion Teklogix 7535 Hand-Held Computer User Manual
FKEY0-7, FKEY8-15, FKEY16-23, FKEY24-31 And FKEY32-39
The sub-menus attached to these parameters allow you to map the 7535 function
keys.
5250/Telnet Emulation
WEC (Write Error Code)
This parameter determines the type of WEC used. If set to “advisory”, a TESS
advisory message is generated when the host sends a WEC command to the 7535.
Otherwise, if set to “screen text”, the 7535 locks the keyboard and displays the error
message contained in the WEC command on the screen at the line specified by the
host. In this case, the 7535 must be unlocked manually using the function key
mapped to RESET.
FKEY0 ENTER
FKEY1 F1
FKEY2 F2
FKEY3 F3
FKEY4 F4
FKEY5 F5
FKEY6 F6
FKEY7 F7
06
FKEY0-7
WEC Advisory see text
Remap Underline to None see text
Intl EBCDIC N Y/N
Nulls in Fields Y Y/N
Term Type IBM-5251-11 see text
Virtual Dev Enable N Y/N
Virtual Dev Prefix see text
Features » see text
FKEY0-7 » see text
FKEY8-15 » see text
FKEY16-23 » see text
FKEY24-31 » see text
FKEY32-39 » see text
Emulation
Range
05