User's Manual Part 2

Chapter 6: Tekterm Application

Scan-See Keyboard Mapping

244

Psion Teklogix 7535 Hand-Held Computer User Manual

When this parameter is set to “Y”, the XON and XOFF characters are not passed to

the TESS or ANSI tasks. A received XOFF character stops the serial port from

transmitting. A received XON character starts the serial port transmissions again.

6.19.3.2 Scan-See Keyboard Mapping

• Digits (0-9) are passed verbatim

• The CLR key forces a sign-on message and display refresh. This only

occurs when CLR is pressed and the CLR key on the display is pressed,

then released.

• The three F-keys are mapped to F1, F2 and F3, respectively.

• The ENT key is mapped to the carriage-return (‘\r’) character.

• The two arrow keys are handled locally, and control the brightness, and the

line and column offsets, as described on page 242.

• Bar-code data is stripped off any identifying headers (symbology, etc.)

and passed verbatim.

The Scan-See is capable of displaying only a subset of the default PC-8 ASCII

character set. Any characters that cannot be displayed are currently translated to ‘.’.

6.20 Network

Ctrl Panel »

802.IQv2 »

Network