User's Manual Part 2

Chapter 6: Tekterm Application
The Parameters Menu
176
Psion Teklogix 7535 Hand-Held Computer User Manual
6.11 The Parameters Menu
• At the ‘Display’ menu, type a to display the Parameters menu.
The “Parameters” menu allows you to adjust the screen contrast and select a security
level. With a Supervisory or Teklogix password, you can also access the parameters
listed in the “More Parameters” sub-menu.
6.11.1 Security Settings
To access the “More Parameters” sub-menus, the “Security” parameter must be set
to either a Supervisor or a Teklogix level password. The default security level is
User.
• Position the cursor on “Security”, and press the <RIGHT> arrow key to
display the Supervisor option.
• Press <ENTER>.
A Password screen is displayed.
• Type the supervisory level password – it is set at the factory to 123456.
• Press <ENTER>.
Changing A Password
Important: “Sup. Password” on page 186 describes how to change a supervi-
sory level password and how to change “User” options.
More Parameters » see page 177
Security User see page 176
Display » see page 177
01
Parameters
Range
More Parameters » see page 177
Security User see text
Display » see text
01
Parameters
Range
. . . . . .
Password