User's Manual Part 2

Psion Teklogix 7535 Hand-Held Computer User Manual 185
Chapter 6: Tekterm Application
Security
6.15.4 Security
6.15.4.1 Default Mode
The value assigned to this parameter determines the operator’s level of access to
7535 parameters. The allowable values are User, Supervisor and Teklogix. “Default
mode” is set to User.
At User level, the operator is restricted to a small group of parameters. These are
listed in the “User” sub-menu. Refer to “User Level Options” on page 185 for
details. Choosing Supervisor allows access to all the parameters available in the
7535.
The Teklogix level password is only available to Psion Teklogix personnel.
• Press the <LEFT> or <RIGHT> arrow key to select the appropriate security
level – User, Supervisor or Teklogix.
6.15.4.2 User Level Options
Important: Only Supervisor and Teklogix level passwords can change the
values of the User options.
Screen Switch
When set to “Y”, the operator can use the “Split screen” parameter to toggle
between screens when multiple applications are running on the 7535. Refer to “Split
Screen” on page 188 for details about using this function.
Default mode User Supervisor, Teklogix
User » see text
Sup. password ###### see text
Allow Teklogix Y Y/N
Security
04
Range
Screen switch Y Y/N
View Mode Y Y/N
Font Chg Y Y/N
User
05
Range