User's Manual Part 2

Chapter 6: Tekterm Application

Moving Between Split Screens

190

Psion Teklogix 7535 Hand-Held Computer User Manual

6.17.1.2 Moving Between Split Screens

To move the cursor from one pane in a split screen to the next:

• Press <CTRL> <RIGHT> or <LEFT>. The cursor moves in order from the

left-most pane to the right and from the top-most pane to the bottom.

6.17.1.3 Toggling Between Full & Split Screens

To toggle between a split and full screen format:

• Press <CTRL> <DOWN> arrow.

The application displayed when toggling from a split to a full screen format is

determined by the cursor location in the split screen. For example, if the cursor

is in the pane of a split screen in which the TESS application is displayed and

<CTRL> <DOWN> is pressed to display a full screen, the TESS application will be

displayed in the full screen.

6.17.1.4 Using The Asterisk As A Wild Card

When a screen is split, the application displayed in each pane is ﬁxed in the “View

IDs” parameter. Using an asterisk * in the “View IDs” parameter indicates that a

particular pane in the split screen is not ﬁxed to any particular application and can be

changed as required.

For example, suppose you want to split the screen into two vertical segments with

the left pane containing the “Parameters” menu and the right pane containing no

ﬁxed application. The “Type” and “View IDs” parameters would be completed as

follows:

To change the application displayed in the pane with no ﬁxed application:

• If the cursor is not currently in the pane, press <CTRL> <RIGHT> or

<LEFT> arrow to move the cursor into the appropriate screen.

• Press <CTRL> <ALT><0> to display the startup “Display Menu”.

• Type the letter corresponding to the new application you want to display.

Type 2 Way |||

View IDs A*

04 Split screen