User's Manual Part 2

Psion Teklogix 7535 Hand-Held Computer User Manual 199

Chapter 6: Tekterm Application

Screen

To change values:

• Press the <UP> or <DOWN> arrow key to highlight a function key.

• Press the <TAB> key to move through the string of values.

• Either type new values, or press the <LEFT> or <RIGHT> arrow key to

change the values.

6.18.1.2 Screen

# of Pages

This parameter deﬁnes how many pages are accessible to application programs. The

ANSI control functions – Next Page (NP) and Previous page (PP) – are used to

select another page. These pages are independent of each other so that if lines of text

scroll off a page, the other pages are unaffected.

There is no error indication from the hand-held computer if the memory required by

the selected number and size of pages exceeds the memory available in the

computer.

# of Rows

This parameter deﬁnes the logical page length (in lines) used by the host computer

application. Emulator systems trim the host application screens to this length. This

page length cannot be smaller than the length of the hand-held’s display. Display

panning is used if the page is longer than the display.

Note: The value in this parameter must be an even number.

# of Pages 4 0..16

# of Rows 24 4..60

# of Cols

80 80 or 132

Default Font 16x30 see text

80-col. Font 16x30 see text

132-col. Font 16x30 see text

Video » see text

Label F1-F6 » see text

Colour override N » see text

Range

Screen