User's Manual Part 2

Psion Teklogix 7535 Hand-Held Computer User Manual 213
Chapter 6: Tekterm Application
Host Conn.
Terminal #
For every application session you create, the “Terminal #” assigned must be non-
zero and unique. This parameter defines the terminal number for the TESS session
and uniquely identifies all transmissions to and from the 7535.
Other applications running in the 7535, such as an ANSI session or another TESS
session must each have a different number. In addition, each Psion Teklogix 7535
using the radio link must have a unique number.
6.18.2.1 Host Conn.
Conn Type
The options for this a parameter vary depending on the type of application you are
running – ANSI or TESS.
For TESS applications, this parameter allows you to choose one of the following
types of connections:
802.IQv2, 9010t (TCP Direct), 2392/Telnet,
3274/Telnet and 5250/Telnet.
Settings
Note: The “Settings” sub-menu is not available when 802.IQv2 is selected as
the “Conn Type”
Host
This parameter is used to assign a host IP address using the format ###.###.###.###
Port
“Port” specifies the port number. By default, the port is assigned the value 9999.
Conn Type 802.IQv2 see text
Settings » see text
Range
Host Conn
Host see text
Port 9999 0-9999
Range
Settings