User's Manual
Table Of Contents
- Cover
- Program License Agreements
- TABLE OF CONTENTS
- Approvals And Safety Summary
- Introduction 1
- Basic Checkout 2
- Getting To Know Your 7535 3
- 3.1 Features Of The 7535
- 3.2 The Battery
- 3.3 Switching The 7535 Hand-Held On And Off
- 3.4 The Keyboard
- 3.5 The Display
- 3.6 7535 Indicators
- 3.7 Internal Scanners
- 3.8 Connecting & Disconnecting Tethered Peripherals
- 3.9 Monitoring The Battery And Maximizing Run Time
- 3.10 Monitoring The Network Connection
- 3.11 Uploading Data In A Docking Station
- 3.12 General Maintenance
- Working With Windows CE 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 Pocket PC Compatibility
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.7 Scanner Properties Setup
- 5.7.1 Scanner Options
- 5.7.2 Bar Codes
- 5.7.2.1 Code 39 Settings
- 5.7.2.2 Code 128 Settings
- 5.7.2.3 EAN 13 Settings
- 5.7.2.4 EAN 8
- 5.7.2.5 UPC And EAN Settings
- 5.7.2.6 UPC A Settings
- 5.7.2.7 UPC E Settings
- 5.7.2.8 Codabar
- 5.7.2.9 Code 93
- 5.7.2.10 Code 11
- 5.7.2.11 Interleaved 2 of 5
- 5.7.2.12 MSI Plessey
- 5.7.2.13 Discrete 2 of 5
- 5.7.2.14 IATA 2 of 5
- 5.7.2.15 Postal: Australian
- 5.7.2.16 Postal: Japanese
- 5.7.2.17 Postal: Korean
- 5.7.2.18 Postal: PlaNET
- 5.7.2.19 Postal: PostNET
- 5.7.2.20 Postal: Royal Mail
- 5.7.2.21 2D DataMatrix
- 5.7.2.22 2D Maxicode
- 5.7.2.23 2D PDF-417
- 5.7.2.24 2D Micro PDF-417
- 5.7.2.25 2D QR Code
- 5.7.2.26 2D RSS Code
- 5.7.2.27 Aztec
- 5.7.3 Translations
- 5.8 SNMP (Simple Network Management Protocol) Setup
- Tekterm Application 6
- 6.1 The Tekterm Application
- 6.2 Additional Keyboard Functions
- 6.3 Keyboard Modes
- 6.4 The Tekterm Status Area
- 6.5 TESS Emulation
- 6.6 ANSI Emulation
- 6.7 The Radio Statistics Screen
- 6.8 The Tekterm Startup Display Menu
- 6.9 Working With Menus
- 6.10 Resetting The 7535 Hand-Held Computer
- 6.11 The Parameters Menu
- 6.12 Display Options
- 6.13 More Parameters
- 6.14 Radio Parameters
- 6.15 System Parameters
- 6.16 Scanner Control Panel
- 6.17 View Manager
- 6.18 Applications
- 6.19 Ports- Tether And Console
- 6.20 Network
- Peripheral Devices & Accessories 7
- 7.1 External Bar Code Readers
- 7.2 The 7535 Battery
- 7.3 Important Charger Safety Instructions
- 7.4 Chargers
- 7.5 Gang Charger
- 7.6 Combo Charger
- 7.10 Bluetooth Peripherals
- 7.11 The 7535 Picker Cradle
- Specifications 8
- Support Services And Worldwide Offices
- Port Pinouts
- USB Setup Application
Psion Teklogix 7535 Hand-Held Computer User Manual 205
Chapter 6: Tekterm Application
Xmit Modes
GATM
When the Guarded Area Transfer Mode (GATM) parameter is disabled (set to “N”),
only unguarded data is transmitted to the host or transferred to the console or
serial ports. When enabled (set to “Y”), both guarded and unguarded data can be
transmitted to the host or transferred to the console or serial ports.
MATM
When the Multiple Area Transfer Mode (MATM) parameter is disabled (set to “N”),
only the selected area containing the cursor can be transmitted to the host or
transferred to the console or serial ports. When enabled (set to “Y”), all selected
areas can be transmitted to the host or transferred to the console or serial ports.
This mode is significant only if the Selected Area Transfer Mode (SATM) is disabled.
SATM
When the Selected Area Transfer Mode (SATM) parameter is disabled (set to “N”),
the selected areas defined by SSA/ESA and DAQ can be transmitted to the host or
transferred to the console or serial ports. When enabled (set to “Y”), the full contents
of the buffer can be transmitted to the host or transferred to the console or serial ports.
TTM
When the Transfer Termination Mode (TTM) parameter is disabled (set to “N”), the
cursor position determines the end of the string that can be transmitted to the host
or transferred to the console or serial ports. When enabled (set to “Y”), the cursor
position is ignored.
EOL chars
This string entry parameter specifies a string of up to 8 characters that are sent after
each line in a block transmission. If the parameter is not used, the rules specified in
“Transmitted Data Stream” are used to determine end of line characters.
EOB chars
This string entry parameter specifies a string of up to 8 characters that are sent after
each block transmission.