User's Manual

Chapter 3: Getting To Know Your 7535
Switching The 7535 Hand-Held On And Off
34
Psion Teklogix 7535 Hand-Held Computer User Manual
• Combo Docking Station (Model #HU4002) – operates as both a charger
and a docking station. Operating as a charger, both the battery installed in
the computer and a spare battery can be charged simultaneously.
• Quad Docking Station (Model #HU4004) – can charge the battery of up to
four 7535s inserted in the docking station while transferring data through an
Ethernet connection.
• Powered Cradle (Model #HU1000, HU1010) – can charge the 7535 with
the battery installed in the hand-held.
It can take from 1.5 to 4 hours to charge a battery. The 7535’s intelligent charging
system protects the battery from over-charging by terminating the charge process
when the battery is at maximum capacity.
Note: Refer to “Monitoring The Battery And Maximizing Run Time” on page 53
for additional information about the 7535 battery.
Important: To avoid damaging the battery, chargers will not begin the charge
process until the battery temperature is between 0˚C (32˚F) and
39˚C (102˚F). If the battery is too hot or cold, the battery status
LED flashes yellow and the charge is suspended. Refer to
Table 3.1, “Charge LEDs” on page 43 for details.
3.3 Switching The 7535 Hand-Held On And Off
Switching On The 7535
• Press and hold down the <ENTER/ON> key for at least one second.
• When all four LEDs flash orange, release the <ENTER/ON> button.
A splash screen displaying the Psion Teklogix logo and the Microsoft®
Windows® CE. net logo appears followed by the startup desktop.
Note: If the 7535 is in suspend state, pressing <ENTER/ON> key ‘wakes’ the
unit from this state. The screen in which you were working before the
computer entered suspend state is displayed.