User's Manual
Table Of Contents
- Cover
- Program License Agreements
- TABLE OF CONTENTS
- Approvals And Safety Summary
- Introduction 1
- Basic Checkout 2
- Getting To Know Your 7535 3
- 3.1 Features Of The 7535
- 3.2 The Battery
- 3.3 Switching The 7535 Hand-Held On And Off
- 3.4 The Keyboard
- 3.5 The Display
- 3.6 7535 Indicators
- 3.7 Internal Scanners
- 3.8 Connecting & Disconnecting Tethered Peripherals
- 3.9 Monitoring The Battery And Maximizing Run Time
- 3.10 Monitoring The Network Connection
- 3.11 Uploading Data In A Docking Station
- 3.12 General Maintenance
- Working With Windows CE 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 Pocket PC Compatibility
- 5.3 The Control Panel
- 5.4 Control Panel Icons
- 5.5 Basic Setup
- 5.7 Scanner Properties Setup
- 5.7.1 Scanner Options
- 5.7.2 Bar Codes
- 5.7.2.1 Code 39 Settings
- 5.7.2.2 Code 128 Settings
- 5.7.2.3 EAN 13 Settings
- 5.7.2.4 EAN 8
- 5.7.2.5 UPC And EAN Settings
- 5.7.2.6 UPC A Settings
- 5.7.2.7 UPC E Settings
- 5.7.2.8 Codabar
- 5.7.2.9 Code 93
- 5.7.2.10 Code 11
- 5.7.2.11 Interleaved 2 of 5
- 5.7.2.12 MSI Plessey
- 5.7.2.13 Discrete 2 of 5
- 5.7.2.14 IATA 2 of 5
- 5.7.2.15 Postal: Australian
- 5.7.2.16 Postal: Japanese
- 5.7.2.17 Postal: Korean
- 5.7.2.18 Postal: PlaNET
- 5.7.2.19 Postal: PostNET
- 5.7.2.20 Postal: Royal Mail
- 5.7.2.21 2D DataMatrix
- 5.7.2.22 2D Maxicode
- 5.7.2.23 2D PDF-417
- 5.7.2.24 2D Micro PDF-417
- 5.7.2.25 2D QR Code
- 5.7.2.26 2D RSS Code
- 5.7.2.27 Aztec
- 5.7.3 Translations
- 5.8 SNMP (Simple Network Management Protocol) Setup
- Tekterm Application 6
- 6.1 The Tekterm Application
- 6.2 Additional Keyboard Functions
- 6.3 Keyboard Modes
- 6.4 The Tekterm Status Area
- 6.5 TESS Emulation
- 6.6 ANSI Emulation
- 6.7 The Radio Statistics Screen
- 6.8 The Tekterm Startup Display Menu
- 6.9 Working With Menus
- 6.10 Resetting The 7535 Hand-Held Computer
- 6.11 The Parameters Menu
- 6.12 Display Options
- 6.13 More Parameters
- 6.14 Radio Parameters
- 6.15 System Parameters
- 6.16 Scanner Control Panel
- 6.17 View Manager
- 6.18 Applications
- 6.19 Ports- Tether And Console
- 6.20 Network
- Peripheral Devices & Accessories 7
- 7.1 External Bar Code Readers
- 7.2 The 7535 Battery
- 7.3 Important Charger Safety Instructions
- 7.4 Chargers
- 7.5 Gang Charger
- 7.6 Combo Charger
- 7.10 Bluetooth Peripherals
- 7.11 The 7535 Picker Cradle
- Specifications 8
- Support Services And Worldwide Offices
- Port Pinouts
- USB Setup Application
Chapter 3: Getting To Know Your 7535
Troubleshooting
50
Psion Teklogix 7535 Hand-Held Computer User Manual
3.7.3 Troubleshooting
If the scanner is not working, investigate the following:
• Is the 7535 on?
• Check that the bar code symbology being scanned is enabled for the 7535
you are using. Check any other parameters that affect the scanning proce-
dure or the bar code.
• Check the bar code to make sure it is not damaged. Try scanning a different
bar code to verify that the problem is not with the bar code.
• Check that the bar code is within the proper range.
• Does the hand-held display the warning without scanning? This suggests a
hardware problem in the 7535.
• Is the laser beam scanning across the bar code?
• Once the scan beam has stopped, check the scanner window for
dirt or fogging.
3.7.4 Operating One Dimensional (1D) Internal Laser Scanners
• Turn the 7535 on. Wait until the unit has booted up completely.
Important: If an aiming dot is available on the installed scanner, the dot will
be enabled for a configurable time period (including off), after
which normal scanning begins. Refer to “Dot Time (msec)” on
page 120 for details.
Double-clicking the trigger will override the aiming delay and
initiate an immediate scan. Note that the aiming dot is standard
on long-range and high visibility internal scanners.
• Aim at the bar code and press the scan key or the trigger. A scan beam and a
warning indicator appear until a successful decode is achieved or six
seconds have elapsed.