User's Manual
Table Of Contents
- Table of Contents
- Introduction 1
- Basic Operation 2
- 2.1 Omnii Features
- 2.2 Preparing Omnii for Operation
- 2.3 Switching Omnii On and Off
- 2.4 Resetting Omnii
- 2.5 Attaching Carrying Accessories
- 2.6 Calibrating the Touchscreen
- 2.7 Configuring Your Wireless Network
- 2.8 Wireless Networking
- 2.9 Checking the Scanner
- 2.10 Data Transfer between Omnii and a PC
- 2.11 Voice – Using the Phone Dialer
- Getting To Know Your Omnii 3
- Windows Embedded CE 6.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 Pocket PC Compatibility
- 5.4 The Control Panel
- 5.5 Control Panel Applications: Basic Setup
- 5.6 Bluetooth® Setup
Chapter 5: Configuration
Power Properties
Psion Teklogix Omnii Hand-Held Computer User Manual 121
Enable Battery Health Service
This option allows you to enable the service. To access the menus after enabling the service,
you will need to either wait until a resume from Suspend or restart Omnii.
Wakeup Device on Battery Insert
When this option is enabled, whenever the battery is replaced Omnii is powered up from
Suspend and the current health of the battery is displayed.
Add Health Colour to the Taskbar Battery Tray Icon
Enabling this option changes the background colour for the battery icon in the Taskbar,
based on battery condition: Green (excellent), Yellow (used), and Red (battery should
be replaced).
Show Popup UI on Device-Resume
You can decide when the battery status pop-up user interface (UI) will appear, for how many
seconds, and whether the battery cycle count is displayed (off by default).
Edit
You can customize the ratings text with the Edit option. By enclosing your text within the
html tag used for Bold <b> (or removing the tag to unbold the text), you can change the text
that will appear in the pop-up battery status screen. For example, the default text
“Excellent” can be changed to: “Battery is excellent, and will last one day shift.”...
Draft 1