User's Manual
Table Of Contents
- Table of Contents
- Introduction 1
- Basic Operation 2
- 2.1 Omnii Features
- 2.2 Preparing Omnii for Operation
- 2.3 Switching Omnii On and Off
- 2.4 Resetting Omnii
- 2.5 Attaching Carrying Accessories
- 2.6 Calibrating the Touchscreen
- 2.7 Configuring Your Wireless Network
- 2.8 Wireless Networking
- 2.9 Checking the Scanner
- 2.10 Data Transfer between Omnii and a PC
- 2.11 Voice – Using the Phone Dialer
- Getting To Know Your Omnii 3
- Windows Embedded CE 6.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 Pocket PC Compatibility
- 5.4 The Control Panel
- 5.5 Control Panel Applications: Basic Setup
- 5.6 Bluetooth® Setup
Chapter 5: Configuration
PsionVU Access
122 Psion Teklogix Omnii Hand-Held Computer User Manual
5.5.9 PsionVU Access
PsionVU Access enables you to customize your computer settings, remove or add shortcuts
to the desktop and Control Panel, and limit access to various different components on the
computer and the system tray icons for security.
•In the Control Panel, choose the PsionVU icon.
When opening the PsionVU application, the PsionVU Access dialog will come up that
enables you to either proceed to the PsionVU Settings menus, or change from you current
Access mode to the other (Administrator or User). The computer must be reset following a
change, and a confirmation will appear to enable you to continue or dismiss the change.
When opening the PsionVu Settings option, the following menus will be available:
Note: The Desktop theme can be changed from the default Windows Classic Shell to the
PsionVU Shell either in the PsionVU Access settings (see “Other Shell Themes” on
page 126) or by tapping on the Desktop icon PsionVU Shell (see “The PsionVU
Desktop Shell” on page 76).
Draft 1