User's Manual
Table Of Contents
- Table of Contents
- Introduction 1
- Basic Operation 2
- 2.1 Omnii Features
- 2.2 Preparing Omnii for Operation
- 2.3 Switching Omnii On and Off
- 2.4 Resetting Omnii
- 2.5 Attaching Carrying Accessories
- 2.6 Calibrating the Touchscreen
- 2.7 Configuring Your Wireless Network
- 2.8 Wireless Networking
- 2.9 Checking the Scanner
- 2.10 Data Transfer between Omnii and a PC
- 2.11 Voice – Using the Phone Dialer
- Getting To Know Your Omnii 3
- Windows Embedded CE 6.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 Pocket PC Compatibility
- 5.4 The Control Panel
- 5.5 Control Panel Applications: Basic Setup
- 5.6 Bluetooth® Setup
Chapter 5: Configuration
PsionVU Access
Psion Teklogix Omnii Hand-Held Computer User Manual 123
Figure 5.4 PsionVU Settings
5.5.9.1 Administrator Password
By setting an Administrator Password, you can limit access to various different components
on the computer and the system tray icons for security. The default security setting allows
User access to all options, therefore restrictions and settings can be configured without
setting a password.
When an administrator password is set, the restricted options are accessed using a key com-
bination. If a password has been set, the user would be prompted for the password.
Note: If a setting or restriction is configured without setting an Administrator password,
the following message is displayed: “!Administrator password is currently not set.”
Once a password has been set, the message will disappear.
Draft 1