User's Manual
Table Of Contents
- Table of Contents
- Introduction 1
- Basic Operation 2
- 2.1 Omnii Features
- 2.2 Preparing Omnii for Operation
- 2.3 Switching Omnii On and Off
- 2.4 Resetting Omnii
- 2.5 Attaching Carrying Accessories
- 2.6 Calibrating the Touchscreen
- 2.7 Configuring Your Wireless Network
- 2.8 Wireless Networking
- 2.9 Checking the Scanner
- 2.10 Data Transfer between Omnii and a PC
- 2.11 Voice – Using the Phone Dialer
- Getting To Know Your Omnii 3
- Windows Embedded CE 6.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 Pocket PC Compatibility
- 5.4 The Control Panel
- 5.5 Control Panel Applications: Basic Setup
- 5.6 Bluetooth® Setup
Chapter 2: Basic Operation
Wi-Fi Config: Configure Tab
Psion Teklogix Omnii Hand-Held Computer User Manual 23
2.8.2.2 Encryption
The Encryption menu allows you to choose the type of encryption that will be used to
protect transmitted data. Choose an Encryption method valid for your network from the
drop-down menu. Only the Encryption options that are compatible with the type of Auth.
Mode you’ve chosen will be listed. In fact, in some cases, this menu will not be available
at all.
2.8.2.3 EAP
This menu allows you to choose the EAP (Extensible Authentication Protocol) type used for
802.1x authentication to an access point.
The following EAP types are supported by Wi-Fi Config:
• TLS: Provides strong security via the use of client certificates for user authentication.