User's Manual
Table Of Contents
- Table of Contents
- Introduction 1
- Basic Operation 2
- 2.1 Omnii Features
- 2.2 Preparing Omnii for Operation
- 2.3 Switching Omnii On and Off
- 2.4 Resetting Omnii
- 2.5 Attaching Carrying Accessories
- 2.6 Calibrating the Touchscreen
- 2.7 Configuring Your Wireless Network
- 2.8 Wireless Networking
- 2.9 Checking the Scanner
- 2.10 Data Transfer between Omnii and a PC
- 2.11 Voice – Using the Phone Dialer
- Getting To Know Your Omnii 3
- Windows Embedded CE 6.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 Pocket PC Compatibility
- 5.4 The Control Panel
- 5.5 Control Panel Applications: Basic Setup
- 5.6 Bluetooth® Setup
Chapter 2: Basic Operation
Configuring TCP/IP
Psion Teklogix Omnii Hand-Held Computer User Manual 27
The Wireless Statistics screen is displayed.
• Tap on the IP Information tab.
Figure 2.7 SDIO86861 IP Information Tab
To define a static IP address:
• Tap on the Configure button.
Note: When DHCP is enabled, tapping the ‘Renew’ button forces Omnii to renew or find a
new IP address. This is useful if, for example, you are out of communication range
for a longer period of time and your hand-held is dropped from the network.