User's Manual
Table Of Contents
- Table of Contents
- Introduction 1
- Basic Operation 2
- 2.1 Omnii Features
- 2.2 Preparing Omnii for Operation
- 2.3 Switching Omnii On and Off
- 2.4 Resetting Omnii
- 2.5 Attaching Carrying Accessories
- 2.6 Calibrating the Touchscreen
- 2.7 Configuring Your Wireless Network
- 2.8 Wireless Networking
- 2.9 Checking the Scanner
- 2.10 Data Transfer between Omnii and a PC
- 2.11 Voice – Using the Phone Dialer
- Getting To Know Your Omnii 3
- Windows Embedded CE 6.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 Pocket PC Compatibility
- 5.4 The Control Panel
- 5.5 Control Panel Applications: Basic Setup
- 5.6 Bluetooth® Setup
Chapter 3: Getting To Know Your Omnii
Inserting the microSD Card and SIM Card
56 Psion Teklogix Omnii Hand-Held Computer User Manual
3.6 Inserting the microSD Card and SIM Card
There are two slots available in the battery compartment—the lower slot is provided for a
microSD (Secure Digital) card, which provides additional non-volatile memory to your
Omnii, and the upper slot is for a SIM (Subscriber Identity Module) card, which allows
access to the Voice option, access to the Internet, and so on.
3.6.1 Inserting the Cards
• Switch off the power to Omnii.
• Remove the battery.
• Use a Phillips screwdriver to remove the SD cover screw. Flip the cover open or
remove it.
For a microSD card:
• Slide the microSD card door to the left to unlock it. Flip it open.
• Slide the microSD card into the guides on the SD card door.
• Close the microSD card door, and slide it to the right to lock it.
OPEN
LOCK
SD Cover
microSD Card Slot
SIM Card Slot
icro
M