User's Manual
Table Of Contents
- Table of Contents
- Introduction 1
- Basic Operation 2
- 2.1 Omnii Features
- 2.2 Preparing Omnii for Operation
- 2.3 Switching Omnii On and Off
- 2.4 Resetting Omnii
- 2.5 Attaching Carrying Accessories
- 2.6 Calibrating the Touchscreen
- 2.7 Configuring Your Wireless Network
- 2.8 Wireless Networking
- 2.9 Checking the Scanner
- 2.10 Data Transfer between Omnii and a PC
- 2.11 Voice – Using the Phone Dialer
- Getting To Know Your Omnii 3
- Windows Embedded CE 6.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 Pocket PC Compatibility
- 5.4 The Control Panel
- 5.5 Control Panel Applications: Basic Setup
- 5.6 Bluetooth® Setup
Chapter 3: Getting To Know Your Omnii
Onscreen Indicators
Psion Teklogix Omnii Hand-Held Computer User Manual 53
3.4.1.4 Scanner Status LED
The fourth (far right) LED indicates scanner status.
3.4.2 Onscreen Indicators
The taskbar at the bottom of the screen displays a variety of system status indicators, includ-
ing the Input Panel button if you have chosen to show that option in the Taskbar and Start
Menu settings.
Figure 3.4 Taskbar
The taskbar changes dynamically, and only those icons that are applicable are displayed. For
example, if a radio is not installed in your Omnii, the radio signal icon is not displayed in
the taskbar.
Scan LED Behaviour Function
OFF The scanner is not in use.
Solid Red during scan Scan in progress.
Solid Green after decode
OFF when scan ended
Successful scan.
Flashing Red Unsuccessful scan.