User's Manual
Table Of Contents
- Table of Contents
- Introduction 1
- Basic Operation 2
- 2.1 Omnii Features
- 2.2 Preparing Omnii for Operation
- 2.3 Switching Omnii On and Off
- 2.4 Resetting Omnii
- 2.5 Attaching Carrying Accessories
- 2.6 Calibrating the Touchscreen
- 2.7 Configuring Your Wireless Network
- 2.8 Wireless Networking
- 2.9 Checking the Scanner
- 2.10 Data Transfer between Omnii and a PC
- 2.11 Voice – Using the Phone Dialer
- Getting To Know Your Omnii 3
- Windows Embedded CE 6.0 4
- Configuration 5
- 5.1 Remote Desktop Connection
- 5.2 The TekTerm Application
- 5.3 Pocket PC Compatibility
- 5.4 The Control Panel
- 5.5 Control Panel Applications: Basic Setup
- 5.6 Bluetooth® Setup
Chapter 4: Windows Embedded CE 6.0
The Windows Classic Shell Startup Desktop
Psion Teklogix Omnii Hand-Held Computer User Manual 65
4.4 The Windows Classic Shell Startup Desktop
When Omnii boots up, the default startup desktop (Windows Classic Shell) is displayed.
Any applications stored in the Startup folder start up immediately.
Figure 4.3 Omnii Windows Classic Shell Startup Desktop
To access desktop icons:
• Double-tap on the icon to open a window or, in the case of an application icon, launch
an application.
On the keyboard:
• Use the arrow keys to highlight the icon, and press [ENTER] to launch the highlighted
icon.
4.4.1 The Desktop Icons
The icons displayed in the startup desktop operate in much the same way as those displayed
on any standard PC desktop that is running Windows.
Note: The startup folder is located in \Windows\StartUp and \Flash Disk\StartUp.
Note: If the arrow keys do not highlight the desktop icons, the desktop may not be selected.
Press [Windows] to display the Start Menu, and select Desktop. Now the desktop
will be “in focus” and the arrow keys will highlight the icons.
Draft 1